NC500
All-material compatible—solid wood, aluminum, PVC, and more. Mould-based clamping cuts 10–30 sticks per cycle with one-touch, near-zero waste operation.
| Total Power | 7.58kw |
| Air Pressure | 6-8MPa |
| Speed | 3800r/min |
| Weight | 1050kg |
| Dimension | NC500 | NC600 Industrial High-Capacity Double Miter Saw & Stack Cutter | CT300 Dust-Free Miter Saw for Picture Framing (Industrial Grade) |
|---|---|---|---|
| Use case | Mid-to-large factories needing batch cutting of 10–30 moulding sticks per cycle | Large-scale factories handling high-volume, stable frame orders with few profile changes | Shops prioritizing dust extraction and cutting wood, MDF, plaster, and specialty profiles |
| Throughput | 10–30 sticks per cycle, very high output | Tens of thousands per day (continuous high-speed cutting) | Hundreds of frames/day |
| Automation level | Manual / semi-auto / fully automatic | Fully automatic linked system | Moving table, fixed saw (semi-automatic) |
| Recommended daily output | 5,000–10,000 frames/day | 10,000+ frames/day | 500–1,000 frames/day |
What efficiency advantage does stack cutting offer over traditional miter saws?
Mould-based clamping lets you cut 10–30 sticks in parallel per cycle, delivering 3–5× the throughput of conventional mitering.
Does it require specialist operators?
Manual, semi-automatic, and fully automatic modes are built in, so operators can get up to speed with minimal training.
Will non-wood materials chip or splinter at the corners?
No—all materials are supported, and the downward cutting motion minimizes corner chipping and burrs.
NC600 Industrial High-Capacity Double Miter Saw & Stack Cutter
Maximize output with the NC600 Double Miter Saw. Industrial-grade stack cutter engineered for mass production of heavy-duty photo frames and moulding.
NN300 Auto Quad-Angle Underpinner V-Nailer Machine
Automate your assembly with the NN300 Auto Underpinner. Features quad-angle nailing and high-speed V-nailer technology for mass frame joining.
FP100 Automatic Easel Back Cutting Saw (Frame Support)
FP100 is an automatic cutting saw for photo frame easel backs. High precision strut card cutter for mass production of frame supports.
Need 10,000+ frames/day with stack cutting? See factory solutions Factory Solutions →