NN19

NN19-Press Head Rubber Band for Pressing Head 75x20x10mm

Press Head Rubber Band Framing Machine – 75mm long

Industrial machinery

Request a quote

Factory-direct pricing · EXW Yiwu

Available — confirm lead time with sales

Category: Framing Machinery & Consumables / Equipment Packages / Starter Kits
MOQ: 100
Lead time: 7-10days

Get quote

View range Contact us

Description

Press Head Rubber Band for Framing Machine – Polyurethane Wedge Compression Pad

The Press Head Rubber Band for Framing Machine is a precision-cut red polyurethane pad installed in the pressing head assembly of corner nailing and framing machines. Its wedge profile geometry is key to how the pressing head self-adjusts against varying moulding profiles, distributing clamping force evenly across the contact area.

Specifications

Length: 75mm. Width: 20mm. Thickness: 10mm (at thickest point). Profile: tapered wedge. Material: red polyurethane. The tapered geometry creates a self-aligning action as the pressing head descends.

Why Polyurethane?

Natural rubber pads in pressing heads harden and crack over time, especially in workshops where solvent-based stains or oils are used. The Press Head Rubber Band for Framing Machine uses polyurethane, which offers superior oil and chemical resistance alongside better long-term compression set resistance.

Installation

Remove the pressing head assembly. Remove the worn rubber pad from its seat. Clean the seat surface. Install the new pad in the correct orientation (thicker edge toward the high-load side as shown in your machine diagram). Reassemble and test clamp pressure.

Service Life

In high-volume production (500+ frames/day), replace pressing head rubber bands every 3-6 months. Lower-volume shops can typically extend service to 12 months between replacements.

Pair with our Tabletop Pressing Block and Cowhide Rubber Band.

Specifications

SKU	NN19
Product Type	hardware
MOQ	100
Lead Time	7-10days
Overview	<p>The Press Head Rubber Band (?????) is a red polyurethane wedge-profile pad used in the pressing head assembly of framing machines. Its tapered 75x20x10mm body provides a controlled, graduated compression response that cushions the pressing head’s impact on the frame moulding during clamping.</p>
Highlights	75mm tapered urethane pad
Custom Packaging	Yes
Length	75 mm
Width	20 mm
Thickness	10 mm
Profile	Tapered wedge
Material	Red Polyurethane

Key specs
—	6

FAQ

What is the profile shape of this rubber band?

It has a wedge (tapered) cross-section — 10mm thick at one end tapering to a thinner edge — allowing the pressing head to self-align against the moulding surface during the clamp stroke.

What material is used?

The pad is machined from red polyurethane, offering excellent compression strength, oil resistance, and surface hardness compared to natural rubber alternatives.

How many pads are typically used per pressing head?

Most pressing head assemblies use one or two pads depending on the machine design. Consult your machine's parts diagram for the correct quantity and orientation.